BEAUTYFLEX PLASTISOL INKS [ 1993 ]
LITHO/OFFSET TRANSFER INKS:
Beautyflex the popular brand widely accepted around the globe for its superior quality high performance & extra coverage.
True tone Litho CMYK Transfer inks specially formulated, finely caliberated to represent dot to dot resolution and synchronized for excellent results and sharpness with all the fastness a print desires for its achievements.
These inks are printed via OFFSET/ litho multicolour automatic press.
Bright Colours. Perfect Resolution. Very good rhealogy.
Consistency in every batch. No Set off behind the sheet.
Specially coated transfer paper is used for making heat transfers.
The print speed of the machine should be medium.
Try not to dump/ stack the whole lot in one position. Always chk that u take 15-20 sheets and keep in the tray flat,this is to avoid the print stacking on the back of the sheet. As it is wet. This takes time to get dry.
Once the CMYK is completed by the Litho Printing process, a SPECIAL Backup Opaque White adhesive is applied by the method of screen printing with an appropriate screen mesh to the already printed sheets area to achieve the transfer quality and then it is to be passed through the curing chamber or flash cured. This white opaque is best suited for dark fabric. If u want to apply on white tshirts then on the pre printed sheet apply printable adhesive and cure it. For extra stretch u can apply on the pre printed sheet opaque white backup and on this printable adhesive.
Note with our litho CMYK you can apply the backup with in 36-40 hrs. Normally other brand inks need backup with in 20-24 hrs or immediate.
After this process is over, you would like to check the print quality on the fabric. For better results transfer after 8 -10 hrs.
You need heat transfer press.There is a digital temperature and timer.Keep the heat platen temperature 160- 180 C degrees and the dwelling timer 8- 10 seconds.
Keep the fabric on the platen surface, keep the transfer print facing printed portion on the fabric.Lock the platen,the process will start and the timer buzzer will sound,remove the top platen sideways. Your print is ready,let it cool down to room temperature,now remove the paper at one go,this is your printed results.
All the products needed for this process is available with us.
Beautyflex Litho CMYK set.
Beautyflex Litho Opaque Backup White Adhesive.
Beautyflex Litho Printable Backup Adhesive.
Specially coated transfer paper in three qualities: CRM thin paper, Glossy effect paper and Matt effect paper.
If you want to print by Screen Process then we have the screen process CMYK and RB
For more details kindly visit our transbeauti dotcom and