Furan Mortar

Business Type

Quick Details

Brand Name: ZEOCHEM
Place of Origin: India
MOQ: 100
Type: Acid Proof
Color: Black

Product Detail

Furan Mortar Furan Resin Mortar is widely used for Acid Resistant Bricks & Tiles lining works as Bedding & Jointing Mortar for Tanks, Floor, Drain, Foundation, Chemical Reaction Vessels, and Neutralization Pit etc. Resistant It is resistant to Non-Oxidizing Acids, Alkalies, Salt, Solvents, Greases, Detergents and Oils. Carbon Filled Furan Mortar is to be used to resist hot & highly concentrated alkalies, Hydrofloric Acid, Flourid Salted etc. Resistant to temperature 170° C (Max.) Preparation of Mortar Preparation of Mortar generally consists of Solution & Powder. In order to obtain good working consistency, the average mixing ratio is 1 Pbw of Solution & 3 pbw of Powder. This ratio will slightly vary depending upon the temperature and working conditions. Prepare small batches of Mortar. Stirrer the Solution thoroughly before use. Place the Solution in a suitable mixing pan and add powder in it. Mix thoroughly with a spatula or Trowel. The mixing operation shall be continued until a uniform mixture is obtained. Make sure that all the Mortar is used from the mixing pan before another batch is prepared. Surface Preparation The cement plastered surface shall be slightly rough in line & level , dry & clean, free from dust, dirt, grease, oil etc., maintaining required slope etc. as no slope can be adjusted or altered in Acid proof lining works. Setting / Curing Furan Resin Mortar is a Self-hardening due to its chemical reaction which occurs when the Powder & Resin are mixed together. An initial setting occurs in 6 to 8 hrs. at 30°C Final Setting occurs in 24 to 48 hrs. at 30°C Curing time: 7 days at 30°C Please ensure that no water shall be spilled over the bricks lining works before it completely cured. Mechanical/Physical property (As per IS-4832 Part-II) Working time at 30°C: 20 minute (min) Density of cured mortar: 1.8 grm per cc Bond strength: 10 Kg.Cm2 Compressive Strength: 350 Kg/Cm2 Flexural Strength: 75 Kg/Cm2 Water Absorption: 1% Storage Life Solution: 12 Months at the temperature 30°C (+2OC) Powder: 6 Months at the temperature 30°C (+2OC) All two components are stored in cool and dry place under the roof until ready to use it original unopened (Sealed) containers. Packing Solution: 25 Kg. in M.S. Drum Powder: 25 Kg. in Plastic Bag.
Mr. Mitesh Patel
Contact Us Contact Details

Similar Products

Adhesive Compound

About our Company

Business Type
11 - 50 People
Annual Revenue
US$1 Million - US$2.5 Million
Main Markets
East Asia, Africa, South Asia, Middle East
Export Ratio
1% - 10%
Adhesive Compound

Regional Suppliers

Adhesive Compound in India

Contact Us


Mr. Mitesh Patel

B5 Rameshwar CHS Ltd., Madhuvan Compound, Dafnala Road,

Ahmedabad Gujarat 380004 India

Send us a message